CT 258 - Canne fumarie

00166039

EN 13063-2:2005

Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions

This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as "wet chimney") with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to prEN 13063-1, in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this standard.This standard does not apply to structurally independent (free standing or self-supporting) system chimneys.

Non prevista

00166038

EN 13063-1:2005

Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance

This European Standard specifies the requirements and test methods for multiwall soot fire resistant system chimneys, working under dry conditions, with corrosion resistance 3, with pressure type N1 or N2 (EN 1443) and a working temperature T400 or T600 in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this standard.This standard does not apply to structurally independent (free standing or self-supporting) system chimneys.

Non prevista

00166033

EN 13384-2:2003

Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance

This European Standard specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliances. A chimney is serving more than one appliance when either it is connected with more than one flue pipe to the appliances or there is one or more flue pipes connected with more than one appliances. This standard deals with chimneys with negative and positive pressure conditions and is valid for chimneys serving heating appliances for liquid, gazeous and solid fuels.

Non prevista

00166036

EN 1443:2003

Chimneys - General requirements

This European Standard specifies general requirements and the basic performance criteria and specifies limit values where appropriate for chimneys (including connecting flue pipes and their fittings) used to convey the products of combustion from heating appliances to the outside atmosphere. It is intended to be used as a reference for product standards for chimneys, flues and specific products (elements, kits and terminals) used in the construction of chimneys. It also identifies minimum requirements for marking and evaluation of conformity.
It does not apply to structurally independent chimneys.

Non prevista

00166011

EN 1857:2003

Chimneys - Components - Concrete flue liners

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for factory-made concrete flue liners and fittings for the construction of multi-wall chimneys.This standard also relates to storey-height and reinforced flue liners.NOTE 1 Classes in this standard, unless otherwise specified, e.g. resistance to fire, are not derived from conditions referred to in article 3.2 of Directive 89/106/EC, and should only be considered as technical classes in the sense of Commission Guidance Paper E 'Levels and classes in the Construction Products Directive'.NOTE 2 Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated.

Non prevista

00166018

EN 1856-1:2003

Chimneys - Requirements for metal chimneys - Part 1: System chimney products

This standard specifies the performance requirements for single and multi-wall metal chimney products with metallic liners used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here, are included in prEN 1856-2:1996. This standard does not apply to structurally independent (free standing or self-supporting) chimneys.

Non prevista

00166019

EN 1859:2000

Chimneys - Metal chimneys - Test methods

This European Standard describes test methods for metal chimney products

Non prevista

00166013

EN 1858:2003

Chimneys - Components - Concrete flue blocks

This European Standard specifies the materials, dimensional and performance requirements for concrete flue blocks as defined in clause 3 for use in system chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to blocks with back ventilation.The standard specifies a type of block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block).The standard also relates to storey-height and reinforced flue blocks.NOTE 1 Classes in this standard are not derived from conditions referred to in article 3.2 of Directive 89/106/EC, and should only be considered as technical classes in the sense of Commission Guidance Paper E 'Levels and classes in the Construction Products Directive'.NOTE 2 Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated.

Non prevista

00166015

EN 12446: 2003

Chimneys - Components - Concrete outer wall elements

This European Standard specifies the material, dimensional and performance requirements for factory made concrete outer wall elements for chimneys including fittings. The standard covers elements having up to four passages designated to accommodate a combination of flue liners and or air ducts. This European Standard also relates to storey-height and reinforced outer wall elements. NOTE 1 Classes in this standard are not derived from conditions referred to in article 3.2 of Directive 89/106/EC and should only be considered as technical classes in the sense of Commission Guidance Paper E "Levels and classes in the Construction Products Directive”. NOTE 2 Any reference to the term ‘outer wall element’ implies both the outer wall elements and their fittings, except where otherwise indicated.

Non prevista

00166006

EN 1457:1999

Chimneys - Clay/ceramic flue liners - Requirements and test methods

This European standard is a product standard for clay/ceramic flue liners with solid walls or walls with vertical perforations for use in the construction of chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This standard specifies the performance requirements for factory made flue liners and chimney fittings. Testing, marking and inspection are covered by this standard

Non prevista

00166001

EN 1443:1999

Chimneys - General requirements

(ritirata e sostituita da edizione 2003)

Non prevista

00166035

EN 12391-1:2003

Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances

This European Standard describes the method of specifying the design criteria and the installation method for building custom built chimneys with rigid metal liners, for relining a chimney with rigid or flexible metal liners and for system chimneys with rigid metallic liners used to convey the products of combustion from heating appliances to the outside atmosphere. It also gives information on commissioning, cleaning and maintenance of an installed chimney.

Non prevista

00166021

EN 1856-2:2004

Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes

This European Standard specifies the performance requirements for rigid or flexible metal liners and rigid or flexible connecting flue pipes (coated or not) used to convey the products of combustion from appliances to the outside atmosphere. These requirements are to be verified where appropriate with the test methods listed in prEN 1859. Connecting flue pipes are intended for internal freely exposed use only. Vitreous enamelled connecting flue pipes are also covered by this standard. Flexible metal liners described in this European Standard are exclusively for renovation or adaptation of existing chimneys.

Non prevista

00166054

EN 1858:2008

Chimneys - Components - Concrete flue blocks

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in clause 3 for use in system chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.

Non prevista

00166049

EN 13384-1:2002/A1:2005

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance

Introduction on a calculation method for concentric balanced flue chimney configurations

Non prevista

00166032

EN 13384-1:2002

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance

This European Standard specifies methods for the calculation of the thermal and fluid dynamic characteristics of chimneys serving one appliance. The methods in this Part of this European Standard are applicable to negative or positive pressure chimneys with wet or dry operating conditions. It is valid for chimneys with heating appliances for fuels subject to the knowledge of the flue gas characteristics which are needed for the calculation. The methods in this Part of this European Standard are applicable to chimneys with one inlet connected with one appliance. The methods in Part 2 of this European Standard are applicable to chimneys with multiple inlets and one inlet with multiple appliances.

Non prevista

00166005

EN 13216-1:2004

Chimneys - Test methods for system chimneys - Part 1: General test methods

This European draft standard specifies test methods for system chimneys. General test methods - for a chimney with a flue liner, material independent are given in clause 5. For the time being, it is planned to publish specific test methods - for a chimney with a clay/ceramic flue liner - for a chimney with a concrete flue liner - for a chimney with a metal flue liner. It is intended to prepare further parts if further material-specific standards are prepared.

Non prevista

00166010

EN 1806:2000

Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods

This European Standard specifies the requirements for clay/ceramic flue blocks with solid walls or walls with vertical perforations including bonding and non-bonding blocks and their fittings. Nonbonding flue blocks which have insulation in the vertical perforations or attached to the outer walls are also covered by this standard. This standard specifies the performance requirements for factory-made flue blocks. When they are installed, they will form a single-wall chimney which will serve to convey products of combustion from fireplaces or heating appliances to the atmosphere under negative pressure. This standard includes components used for domestic and industrial chimneys which are not structurally independent (free-standing). Testing, marking and inspection requirements are covered by this standard.

Non prevista

00166053

EN 1859:2000/A1:2006

Chimneys - Metal chimneys - Test methods

Clarification of test assembly in 4.5.1.1

Non prevista

00166052

EN 1856-1:2003/A1:2006

Chimneys - Requirements for metal chimneys - Part 1: System chimney products

This standard specifies the performance requirements for single and multi-wall metal chimney products with metallic liners used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here, are included in prEN 1856-2:1996. This standard does not apply to structurally independent (free standing or self-supporting) chimneys.
The amendment modifies the test procedure for the corrosion test methods for products designated V3. The amended procedure extends the exposure period to flue gases of the test chimney.

Non prevista

00166037

EN 1457:1999/A1:2002

Chimneys - Clay/ceramic flue liners - Requirements and test methods

This European Standard specifies general requirements and the basic performance criteria and specifies limit values where appropriate for chimneys (including connecting flue pipes and their fittings) used to convey the products of combustion from heating appliances to the outside atmosphere. It is intended to be used as a reference for product standards for chimneys, flues and specific products (elements, kits and terminals) used in the construction of chimneys. It also identifies minimum requirements for marking and evaluation of conformity.
It does not apply to structurally independent chimneys.

Non prevista

00166050

EN 15287-1:2007

Chimneys — Design, installation and commissioning of chimneys — Part 1: Chimneys for non-roomsealed heating appliances

This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys. This European Standard also deals with connecting flue pipes. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances. For the purpose of this European Standard the term "installation" includes construction.
an installed chimney

Non prevista

00166070 (65+33)

EN 13384-2:2003+A1:2009

Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance. This part of EN 13384 covers both the cases, either where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement or where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement. The case of multiple inlet cascade arrangement is covered by the case. This part of EN 13384 deals with chimneys operating under negative pressure conditions (there can be positive pressure condition in the connecting flue pipe) and with chimneys operating under positive pressure conditions and is valid for chimneys serving heating appliances for liquid, gaseous and solid fuels. This part of EN 13384 does not apply to: - chimneys with different thermal resistance or different cross-section in the various chimney segments. This part does not apply to calculate energy gain. - chimneys with open fire places, e.g. open fire chimneys or chimney inlets which are normally intended to operate open to the room - chimneys which serve a mixture of fan assisted or forced draught burners or natural draught appliances. Fan assisted appliances with draught diverter between the fan and the chimney are considered as natural draught appliances. - chimneys with multiple inlets from more than 5 storeys. (This does not apply to balanced flue chimney.) - chimneys serving heating appliances with open air supply through ventilation openings or air ducts, which are not installed in the same air supply pressure region (e.g. same side of building). For positive pressure chimneys this part only applies if any heating appliance which is out of action can be positively isolated to prevent flue gas back flow.

Non prevista

00166051

EN 15287-2:2008

Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances

This European Standard describes the method of specifying the design, installation and labelling criteria for
chimney systems and connecting flue pipes and air supply pipes for room sealed heating applications. It also
gives information on commissioning of an installed chimney.
Room sealed gas appliances are classified as type C according to CR 1749. This classification is also used
for oil fired appliances.

Non prevista

00166067

EN 13384-1:2002+A2:2008

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance

Text is not available

Non prevista

00166030

EN 14471:2005

Chimneys - System chimneys with plastic flue liners - Requirement and test methods

This European standard specifies the performance requirements and test methods for system chimneys with plastic flue liners used to convey the products of combustion from appliances to the outside atmosphere. These chimneys are suitable for operating under wet conditions. It also specifies the requirements for marking, manufacturer's instructions and evaluation of conformity.This European standard describes chimney components from which system chimneys can be assembled.This European standard is not applicable to chimneys with sootfire resistance classification class S.This European standard does not contain all the requirements necessary for chimneys with the following classification:- corrosion resistance class 2 concerning natural wood ;- corrosion resistance class 3;- pressure class N2.This European standard is applicable to chimneys with a minimum inclination of 3 ª to the horizontal.This European standard is only applicable to system chimneys with plastic flue liners and is not applicable for system chimneys with plastic coated flue liners

Non prevista

00166C03

EN 1457:1999/AC:2006

Chimneys - Clay/ceramic flue liners - Requirements and test methods

This European Standard specifies general requirements and the basic performance criteria and specifies limit values where appropriate for chimneys (including connecting flue pipes and their fittings) used to convey the products of combustion from heating appliances to the outside atmosphere. It is intended to be used as a reference for product standards for chimneys, flues and specific products (elements, kits and terminals) used in the construction of chimneys. It also identifies minimum requirements for marking and evaluation of conformity.
It does not apply to structurally independent chimneys.

Non prevista

00166C05

EN 1457:1999/A1:2002/AC:2007

Chimneys - Clay/ceramic flue liners - Requirements and test methods

This European Standard specifies general requirements and the basic performance criteria and specifies limit values where appropriate for chimneys (including connecting flue pipes and their fittings) used to convey the products of combustion from heating appliances to the outside atmosphere. It is intended to be used as a reference for product standards for chimneys, flues and specific products (elements, kits and terminals) used in the construction of chimneys. It also identifies minimum requirements for marking and evaluation of conformity.
It does not apply to structurally independent chimneys.

Non prevista

00166C06

EN 1857:2003/AC:2007

Chimneys - Components - Concrete flue liners

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for factory-made concrete flue liners and fittings for the construction of multi-wall chimneys. This standard also relates to storey-height and reinforced flue liners. NOTE 1: Classes in this standard, unless otherwise specified, e.g. resistance to fire, are not derived from conditions referred to in article 3.2 of Directive 89/106/EC, and should only be considered as technical classes in the sense of Commission Guidance Paper E 'Levels and classes in the Construction Products Directive'. NOTE 2 : Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated. The amendment introduces resistance to freeze/thaw as essential characteristic.

Non prevista

00166078

UNI EN 16475-3:2016

Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

This European standard specifies the requirements and test methods for draught regulators/secondary air device that are used as components, carrying flue gases, in order to limit the draught in chimneys and provide secondary air to the chimney.

Non prevista

00166085

EN 14471:2013 (UNI EN 14471:2014)

Chimneys - System chimneys with plastic flue liners - Requirements and test methods

This European Standard specifies the performance requirements and test methods for system chimneys with plastic flue liners used to convey the products of combustion from appliances to the outside atmosphere under dry and wet conditions. It also specifies the requirements for marking, manufacturer's instructions and evaluation of conformity. This European Standard describes chimney components from which system chimneys can be assembled. This European Standard is not applicable to chimneys with sootfire resistance classification class G. This European Standard is not applicable for chimneys with the following classification: corrosion resistance class 2 concerning natural wood ); corrosion resistance class 3; pressure class N2. This European Standard is applicable to chimneys constructed so that no condensate concentration can occur e.g. with a minimum inclination of 3 ° to the horizontal. This European Standard is only applicable to system chimneys with plastic flue liners and is not applicable for system chimneys with plastic coated flue liners. This European Standard is not applicable to structurally independent (free-standing or self-supporting) chimneys.

Non prevista

00166089

EN 15287-1:2007+A1:2010

Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances

This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys. This European Standard also deals with connecting flue pipes. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances. For the purpose of this European Standard the term "installation" includes construction.

Non prevista

00166094

UNI EN 16475-7:2016

Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods

This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

Non prevista

00166096

UNI EN 13384-1:2015

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance

-

Non prevista

00166097

UNI EN 13384-2:2015

Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance

-

Non prevista