CT 234 - Motori - Commissione Mista CTI-CUNA

ISO 7967-3

ISO 7967-3:2010

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 3: Valves, camshaft drives and actuating mechanisms

Establishes a vocabulary in English, French, and Russian with alphabetical indexes.

Non prevista

ISO 7967-5

ISO 7967-5:2010

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems

Establishes a vocabulary in English, French, and Russian with alphabetical indexes.

Non prevista

ISO 7967-9

ISO 7967-9:1996

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 9: Control and monitoring systems

Establishes a vocabulary in English, French, and Russian with alphabetical indexes.

Non prevista

ISO 3046-4

ISO 3046-4:2009

Reciprocating internal combustion engines -- Performance -- Part 4: Speed governing

This part of ISO 3046 establishes a classification for the requirements and parameters of speed-governing systems and specifies terms and definitions of typical engine speeds for reciprocating internal combustion (RIC) engines.

Non prevista

ISO 7967-2

ISO 7967-2:2010

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 2: Main running gear

Establishes a vocabulary in English, French, and Russian with alphabetical indexes.

Non prevista

ISO 7967-9

ISO 7967-9:2010

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 9: Control and monitoring systems

Establishes a vocabulary in English, French, and Russian with alphabetical indexes.

Non prevista

ISO 7967-1

ISO 7967-1:2005

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 1: Structure and external covers

ISO 7967-1:2005 defines terms relating to engine structural components and external covers of reciprocating internal combustion engines.

Non prevista

ISO 7967-4

ISO 7967-4:2005

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 4: Pressure charging and air/exhaust gas ducting systems

ISO 7967:2005 defines terms relating to pressure charging and air/exhaust gas ducting systems for reciprocating internal combustion engines.

Non prevista

ISO 7967-6

ISO 7967-6:2005

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 6: Lubricating systems

ISO 7967-6:2005 defines terms relating to lubricating systems.

Non prevista

ISO 7967-7

ISO 7967-7:2005

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 7: Governing systems

ISO 7967-7:2005 defines terms relating to governing systems for Reciprocating Internal Combustion (RIC) engines.

Non prevista

ISO 7967-8

ISO 7967-8:2005

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 8: Starting systems

ISO 7967-8:2005 defines terms relating to starting systems for reciprocating internal combustion engines.

Non prevista

ISO 8528-1

ISO 8528-1:2005

Reciprocating internal combustion engine driven alternating current generating sets -- Part 1: Application, ratings and performance

ISO 8528-1:2005 defines various classifications for the application, rating and performance of generating sets consisting of a Reciprocating Internal Combustion (RIC) engine, Alternating Current (a.c.) generator and any associated controlgear, switchgear and auxiliary equipment.

Non prevista

ISO 8528-3

ISO 8528-3:2005

Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets

ISO 8528-3:2005 specifies the principal characteristics of Alternating Current (a.c.) generators under the control of their voltage regulators when used in generating set applications.

Non prevista

ISO 8528-4

ISO 8528-4:2005

Reciprocating internal combustion engine driven alternating current generating sets -- Part 4: Controlgear and switchgear

ISO 8528-4:2005 specifies the criteria for controlgear and switchgear for generating sets with reciprocating internal combustion engines

Non prevista

ISO 8528-6

ISO 8528-6:2005

Reciprocating internal combustion engine driven alternating current generating sets -- Part 6: Test methods

ISO 8528-6:2005 specifies the test methods to be used for characterizing an entire generating set.

Non prevista

ISO 21006

ISO 21006:2006

Internal combustion engines -- Engine weight (mass) declaration

ISO 21006:2006 specifies how to make a declaration of the engine weight (mass) for internal combustion engines.

Non prevista

IEC 88528-11

IEC 88528-11:2004

Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems -- Performance requirements and test methods

Specifies criteria, including performance and test methods, for rotary uninterruptible power systems arising out of a combination of mechanical and electrical rotating machines.

Non prevista

ISO 15031-1

ISO 15031-1:2010

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information

-

Non prevista

ISO 15031-2

ISO 15031-2:2010

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms

-

Non prevista

ISO 15031-4

ISO 15031-4:2005

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment

-

Non prevista

ISO 15031-5

ISO 15031-5:2011

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services

-

Non prevista

ISO 15031-6

ISO 15031-6:2010

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions

-

Non prevista

ISO 15619

ISO 15619:2013

Reciprocating internal combustion engines - Measurement method for exhaust silencers -Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio

-

Non prevista

ISO 7967-10

ISO 7967-10:2014

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 10: Ignition systems

-

Non prevista

ISO 7967-11

ISO 7967-11:2014

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 11: Fuel systems

-

Non prevista

ISO 7967-12

ISO 7967-12:2014

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 12: Exhaust emission control systems

-

Non prevista

ISO 4548-14

ISO 4548-14:2016

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings

-

Non prevista

ISO 8178-4:2017

ISO 8178-4:2017

Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications

-

Non prevista

ISO 8528-7:2017

ISO 8528-7:2017

Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design

-

Non prevista

ISO 8528-8

ISO 8528-8:2016

Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets

-

Non prevista

ISO 8528-9:2017

ISO 8528-9:2017

Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations

-

Non prevista

ISO 8528-13

ISO 8528-13:2016

Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety

-

Non prevista

ISO/TS 19425

ISO/TS 19425:2015

Internal combustion engines - Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure

-

Non prevista

ISO 8528-1

ISO 8528-1:2018

Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance

-

Non prevista

ISO 2710-1

ISO 2710-1:2017

Reciprocating internal combustion engines - Vocabulary - Part 1: Terms for engine design and operation

-

Non prevista

ISO15550

ISO 15550:2016

Internal combustion engines — Determination and method for the measurement of engine power — General requirements

-

Non prevista

ISO 8528-2

ISO 8528-2:2018

Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines

-

Non prevista

ISO 2710-2:2019

ISO 2710-2:2019

Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance

-

Non prevista

ISO 8528-5:2018

ISO 8528-5:2018

Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets

-

Non prevista

ISO/TS 23556

ISO/TS 23556:2007

Performance test method for diesel engine soot-removal devices in lubricating oils -- Initial filtration efficiency

ISO/TS 23556:2007 specifies a multipass soot-filtration test method using batch thermal gravimetric analysis (TGA), continuous online Fourier Transformation Infrared (FTIR), or other approved soot-measuring techniques for evaluating the initial filtration efficiency of single-stage, multiple-stage, centrifugal and other soot-removal devices (SRD) for internal combustion engines submitted to a constant flow rate of test liquid.

Non prevista

ISO 4548-9

ISO 4548-9:2008

Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 9: Inlet and outlet anti-drain valve tests

ISO 4548-9:2007 specifies methods of measuring the effectiveness of either inlet or outlet anti-drain valves if fitted to a full-flow lubricating oil filter of the "spin-on" or "easy change" type, for internal combustion engines.

Non prevista

ISO/DIS 4548-6

ISO 4548-6:2012

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

ISO 4548-6:2012 specifies a method of testing full-flow lubricating oil filters for internal combustion engines to determine their ability to withstand a static pressure objective and to determine their burst pressure and the failure mode concerned

Non prevista

ISO 4548-5

ISO 4548-5:2013

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 5: Test for cold start simulation and hydraulic pulse durability

-

Non prevista

ISO 4548-7

ISO 4548-7:2012

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test

-

Non prevista

ISO 4548-13

ISO 4548-13:2013

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 13: Static burst pressure test for composite filter housings

-

Non prevista

ISO 4548-15

ISO 4548-15:2014

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 15: Vibration fatigue test for composite filter housings

-

Non prevista

ISO 4548-12:2017

ISO 4548-12:2017

Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting and contaminant retention capacity

-

Non prevista

ISO 8178-11

ISO 8178-11:2006

Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions

specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion (RIC) engines under transient conditions on a test bed, necessary for determining one value for each exhaust gas pollutant.

Non prevista

ISO 8178-2

ISO 8178-2:2008

Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

ISO 8178-2:2008, together with ISO 8178-1 and ISO 8178-11, specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines (RIC engines) under steady-state and transient conditions for field testing.

Non prevista

ISO 8178-8

ISO 8178-8:2015

Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination

-

Non prevista

ISO 8178-7

ISO 8178-7:2015

Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination

-

Non prevista

ISO 8178-5

ISO 8178-5:2015

Reciprocating internal combustion engines -- Exhaust emission measurement - Part 5: Test fuels

-

Non prevista

ISO 8178-1:2017

ISO 8178-1:2017

Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions

-

Non prevista

ISO 8178-6

ISO 8178-6:2018

Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test

-

Non prevista

ISO 8178-9:2019

ISO 8178-9:2019

Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter

-

Non prevista

ISO 8178-3:2019

ISO 8178-3:2019

Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter

-

Non prevista

Non ci sono documenti disponibili in questa sezione