User

Password

Recupero Password

CT 202 - Isolanti e isolamento - Metodi di calcolo e di prova (UNI/TS 11300-1)

Coordinatore CT: prof. Corrado Vincenzo - Project Leader: Martino Anna - Project Assistant: N.D. - Maggiori Informazioni

NOTA: titolo modificato dopo la riunione di Seoul – vd. doc 1049 risol. 16

ISO/TC 163/SC 1 - Test and measurement methods

Norme vigenti

Chiudi Tutti

Codice progetto

Codice Norma

Titolo

Sommario

Pubblicazione UNI

Espandi

ISO 24353

ISO 24353:2008

Hygrothermal performance of building materials and products - Determination of moisture adsorption-desorption properties in response to humidity variation

This International Standard specifies the test method for determining of moisture adsorption and desorption properties of building materials used to regulate indoor variation in humidity.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 12567-2

ISO 12567-2:2005

Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows

ISO 12567-2:2005 specifies a method to measure the thermal transmittance of roof windows and projecting windows. It does not include: edge effects occurring outside the perimeter of the specimen, energy transfer due to solar radiation on the specimen and effects of air leakage through the specimen.

Non prevista

Espandi

ISO 29771

ISO 29771:2008

Thermal insulating materials for building applications — Determination of organic content

This Standard specifies the equipment and procedures for determining the organic content of thermal insulating materials.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29769

ISO 29769:2008

Thermal insulating products for building applications — Determination of behaviour under point load

This Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29471

ISO 29471:2008

Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)

This Standard specifies the equipment and procedures to evaluate irreversible dimensional changes of test specimens and full size products with time under constant normal laboratory conditions. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29765

ISO 29765:2008

Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces

This Standard specifies the equipment and procedures for determining the tensile strength of a product perpendicular to its faces. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29467

ISO 29467:2008

Thermal insulating products for building applications — Determination of squareness

This Standard specifies the equipment and procedure for determining the deviation from squareness for length, width and/or thickness of full-size products

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29472

ISO 29472:2008

Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions

This Standard specifies the equipment and procedures for evaluating dimensional changes of specimens under specified conditions of temperature, relative humidity and duration of exposure.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29764

ISO 29764:2008

Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions

This Standard specifies the equipment and procedures for determining the deformation occurring under specified conditions of compressive load, temperature and time. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 21129

ISO 21129:2007

Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Box method

This international standard specifies the box method for determining the steady state water vapour flow rate, water vapour permeance and water vapour permeability of building materials using either one box or two boxes.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29803

ISO 29803:2010

Thermal insulation products for building applications — Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

This Standard specifies equipment and a procedure for determining the resistance to impact of external thermal insulation composite systems.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 29804

ISO 29804:2009

Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

This Standard specifies equipment and procedures for determining the tensile bond strength of the adhesive and of the base coat to the thermal insulation material.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 12968

ISO 12968:2010

Thermal insulation products for building applications — Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)

This International Standard specifies equipment and a procedure for determining of the pull-off resistance of external thermal insulation composite systems (ETICS) which are mechanical fixed or mechanical fixed and bonded. The method described is known as "foam block test".

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 12567-1

ISO 12567-1:2010

Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (Revision of ISO 12567-1:2000)

This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system. This includes all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 18393-1

ISO 18393-1:2012

Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill for ventilated attics

-

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 14857

ISO 14857:2014

Thermal performance in the built environment -- Determination of air permeance of building materials

-

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 9972 rev

ISO 9972:2015

Thermal performance of buildings -- Determination of air permeability of buildings -- Fan pressurization method

-

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 16537

ISO 16537:2012

Thermal insulating products for building applications — Determination of shear behaviour

This International Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests.

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 16544

ISO 16544:2012

Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions

This International Standard specifies equipment and procedures to condition a thermal insulating product to equilibrium moisture content at (23 ± 2) °C and (50 ± 5) % relative humidity

Non prevista

Esegui il login per scaricare i documenti

Espandi

ISO 16545

ISO 16545:2012

Thermal insulating products for building applications — Determination of behaviour under cyclic loading

This International Standard specifies equipment and procedures for determining behaviour of test specimens under cyclic loading conditions. It is applicable to thermal insulating products.
The selection of the conditions of the test shall be derived from the specific requirements of the intended application.

Non prevista

Esegui il login per scaricare i documenti



Norme ritirate

Codice progetto

Codice Norma

Titolo

Sommario

Pubblicazione UNI

ISO 29466

ISO 29466:2008

Thermal insulating products for building applications — Determination of thickness

This Standard specifies the equipment and procedures for determining the thickness of full-size products. It is applicable to thermal insulating products

Non prevista

Esegui il login per scaricare i documenti

ISO 29768

ISO 29768:2008

Thermal insulating products for building applications — Determination of linear dimensions of test specimens

This Standard specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens which are taken from thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

ISO 29468

ISO 29468:2008

Thermal insulating products for building applications — Determination of flatness

This Standard specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products

Non prevista

Esegui il login per scaricare i documenti

ISO 29770

ISO 29770:2008

Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products

This Standard specifies the equipment and procedures for determining the thickness of thermal insulating products for impact sound insulation in floating floor applications.

Non prevista

Esegui il login per scaricare i documenti

ISO 29465

ISO 29465:2008

Thermal insulating products for building applications - Determination of length and width

This Standard specifies the equipment and procedures for determining the length and width of full-size products. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

ISO 29766

ISO 29766:2008

Thermal insulating products for building applications — Determination of tensile strength parallel to faces

This Standard specifies the equipment and procedures for determining the tensile strength of a product parallel to its faces. It is applicable to thermal insulating products

Non prevista

Esegui il login per scaricare i documenti

ISO 29469

ISO 29469:2008

Thermal insulating products for building applications - Determination of compression behaviour

This Standard specifies the equipment and procedures to be used when determining the compression behaviour of specimens.

Non prevista

Esegui il login per scaricare i documenti

ISO 29767

ISO 29767:2008

Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion

This European Standard specifies the equipment and procedures for determining the short-term water absorption of specimens by partial immersion. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

ISO 29470

ISO 29470:2008

Thermal insulating products for building applications — Determination of the apparent density

This Standard specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions.

Non prevista

Esegui il login per scaricare i documenti

ISO 9972

ISO 9972:2006

Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method

This International Standard is intended for the measurement of the air permeability of buildings or parts of buildings in the field. It specifies the use of mechanical pressurization or depressurization of a building or part of a building.

Non prevista

Esegui il login per scaricare i documenti

ISO 12567-1

ISO 12567-1:2000

Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 1: Complete windows and doors

This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system. This includes all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings.

Non prevista

ISO 12344

ISO 12344:2010

Thermal insulating products for building applications - Determination of bending behaviour

Scope not available

Non prevista

ISO 12569

ISO 12569:2012

Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method

This International standard specifies the method of measuring the ventilation rate/specific airflow rate, using a
tracer gas in a building space, which is considered to be of a single zone.
1) The measurement method is valid in spaces where the air is well mixed. In particular, there should be
no large air flows such as cross-ventilation.
2) The specifications set forth as measurement methods using a tracer gas, three measurement methods:
(1) Concentration decay method (2) Continuous dose method and (3) Constant concentration method.

Non prevista

Esegui il login per scaricare i documenti

ISO 9972

ISO 9972:2006/A1:2009

Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method - Amendment 1

This International Standard is intended for the measurement of the air permeability of buildings or parts of buildings in the field. It specifies the use of mechanical pressurization or depressurization of a building or part of a building.

Non prevista

ISO 12623

ISO 12623:2011

Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation

-

Non prevista

Esegui il login per scaricare i documenti

ISO 12624

ISO 12624:2011

Thermal insulating products for building equipment and industrial installations -Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

-

Non prevista

Esegui il login per scaricare i documenti

ISO 12628

ISO 12628:2011

Thermal insulation products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation

-

Non prevista

Esegui il login per scaricare i documenti

ISO 12629

ISO 12629:2011

Thermal insulation products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation

-

Non prevista

Esegui il login per scaricare i documenti

ISO 10077-1

ISO 10077-1:2006/Cor 1:2009

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General - Technical Corrigendum 1

-

Non prevista

ISO 16534

ISO 16534:2012

Thermal insulating products for building applications — Determination of compressive creep

This International Standard specifies the equipment and procedures for determining the compressive creep of specimens under various conditions of stress. It is applicable to thermal insulating products.

Non prevista

Esegui il login per scaricare i documenti

Norme ritirate





Viale Elvezia, 12 - 20154 Milano
Tel. +39 02 266.265.1
Fax +39 02 266.265.50
P.IVA 11494010157

Social CTI

Seguici!

Twitter LinkedIn

Disclaimer - Privacy