CT 243 - Impianti di raffrescamento: pompe di calore, condizionatori, scambiatori, compressori

00113024

CEN/TS 14825:2003

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions

This European Standard specifies the terms, definitions, rating conditions and requirements of variable capacity air conditioners and heat pumps with electrically driven compressors.

Non prevista

00113033

EN 13771-1:2003

Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors

This part 1 of the European Standard applies only to refrigerant compressors and describes a number of selected performance test methods. These methods provide sufficiently accurate results for the determination of the refrigerating capacity, power absorbed, refrigerant mass flow, isentropic efficiency and the coefficient of performance. This standard applies only to performance tests conducted at the manufacturer's works or wherever the equipment for testing to the accuracy required is available. The type of measuring instrument and the limits within which measurements shall be made are listed in normative annex A.

Non prevista

00113026

EN 14511-1:2004

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions

This part of EN 14511 specifies the terms and definitions for the rating and performance of air and water cooled
air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with
electrically driven compressors when used for space heating and/or cooling. This European Standard does not
specifically apply to heat pumps for sanitary hot water, although certain definitions can be applied to these.

Non prevista

00113027

EN 14511-2:2004

- Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions

This part of EN 14511 specifies the test conditions for the rating of air and water cooled air conditioners, liquid
chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven
compressors when used for space heating and/or cooling. It also specifies test conditions for heat recovery
operation of multisplit systems.

Non prevista

00113028

EN 14511-3:2004

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

This part of EN 14511 specifies the test methods for the rating and performance of air and water-cooled air
conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with
electrically driven compressors when used for space heating and cooling.
It also specifies the method of testing and reporting for heat recovery capacities, system reduced capacities and
the capacity of individual indoor units of multisplit systems, where applicable.

Non prevista

00113029

EN 14511-4:2004

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid
chilling packages with electrical driven compressor, are fit for the use designated by the manufacturer when used
for space heating and/or cooling.

Non prevista

00113038

EN 15218:2006

Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling — Terms, definitions, test conditions, test methods and requirements

This standard specifies the terms, definitions, test conditions, test methods and requirements for the rating and performance of air conditioners and liquid chilling packages, with electrically driven compressors and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled condenser is cooled by air and by the evaporation of external additional water. This external additional water is fed by a specific water supply circuit or by a water tank.

Non prevista

00113C02

EN 14511-3:2004/AC:2004

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

This part of EN 14511 specifies the test methods for the rating and performance of air and water-cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and cooling. It also specifies the method of testing and reporting for heat recovery capacities, system reduced capacities and the capacity of individual indoor units of multisplit systems, where applicable. This European Standard applies to factory-made units that can be ducted. This standard applies to factory-made liquid chilling packages with integral condensers or for use with remote condensers. This standard applies to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this standard, except water-cooled multisplit systems. In the case of units consisting of several parts, the standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser. This standard is primarily intended for water and brine chilling packages but can be used for other liquid subject to agreement. This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side. The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant. Installations used for heating and/or cooling of industrial processes are not within the scope of this standard. NOTE 1 Part load testing of units is dealt with in CEN/TS 14825. NOTE 2 All the symbols given in this text should be used regardless of the language used.

Non prevista

00113044

EN 14511-4:2007

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid chilling packages with electrical driven compressor, are fit for the use designated by the manufacturer when used for space heating and/or cooling.

Non prevista

00113041

EN 14511-1:2007

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions

This part of EN 14511 specifies the terms and definitions for the rating and performance of air and water cooled
air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with
electrically driven compressors when used for space heating and/or cooling. This European Standard does not
specifically apply to heat pumps for sanitary hot water, although certain definitions can be applied to these

Non prevista

00113042

EN 14511-2:2007

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions

This part of EN 14511 specifies the test conditions for the rating of air and water cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and/or cooling. It also specifies test conditions for heat recovery operation of multisplit systems.

Non prevista

00113043

EN 14511-3:2007

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

This part of EN 14511 specifies the test methods for the rating and performance of air and water-cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and cooling.

Non prevista

00113034

EN 13771-2:2007

Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units

This part of EN 13771 applies only to condensing units for refrigeration and describes a number of selected performance test methods. These methods provide sufficiently accurate results for the determination of the refrigerating capacity, power absorbed, refrigerant mass flow, isentropic efficiency and the coefficient of performance. This European Standard applies only to performance tests conducted at the manufacturer's works or wherever the instrumention and load stability for testing to the accuracy required is available. The type of measuring instrument and the allowable uncertainty within which measurements shall be made are listed in normative Annex A.

Non prevista

00113045

UNI EN 14825:2012

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling -Testing and rating at part load conditions and calculation of seasonal performance

This European standard covers reduced capacity testing of air conditioners, heat pumps and liquid chilling packages for part load conditions

Non prevista

00113022

EN 13215:2000

Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

This European Standard specifies the rating conditions, tolerances and presentation of performance data for single-stage condensing units for refrigeration with compressors of the positive-displacement type. This is required so that a comparison of different condensing units can be made. The performance data relate to the refrigerating capacity and power absorbed, they include correction factors and refer to full load operation of the condensing unit.

Non prevista

00113046

UNI EN 14511-1:2011

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling — Part 1: Terms and definitions

This part of EN 14511 specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and/or cooling.

Non prevista

00113047

UNI EN 14511-2:2011

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling — Part 2: Test conditions

This part of EN 14511 specifies the test conditions for the rating of air and water cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and/or cooling. It also specifies test conditions for heat recovery operation of multisplit systems.

Non prevista

00113048

UNI EN 14511-3:2011

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

This part of EN 14511 specifies the test methods for the rating and performance of air and water-cooled air conditioners, liquid chilling packages, air-to-air, water-to-air, air-to-water and water-to-water heat pumps with electrically driven compressors when used for space heating and cooling.

Non prevista

00113049

UNI EN 14511-4:2011

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid chilling packages with electrical driven compressor, are fit for the use designated by the manufacturer when used for space heating and/or cooling.

Non prevista

00113C03

EN 14511-3:2007/AC:2008

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

Text is not available

Non prevista

00113054

EN 1397:2015 (UNI EN 1397:2016)

Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance

This European Standard applies to room fan-coil units using hot or chilled water or water mixtures. It applies to units designed for an air flow of not more than 0,7 m3/s and an external static pressure due to duct resistance of 65 Pa max. Air heating may be achieved by means of electrical resistance heaters.

Non prevista

00113C04

UNI EN 16147:2011/AC:2011

Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units

-

Non prevista

00113059

UNI EN 14825:2013

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

-

Non prevista

00113062

UNI EN 15218:2013

Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements

-

Non prevista

00113063

UNI EN 14511-1:2013

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms, definitions and classification

-

Non prevista

00113064

UNI EN 14511-2:2013

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions

-

Non prevista

00113065

UNI EN 14511-3:2013

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods

-

Non prevista

00113066

UNI EN 14511-4:2013

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions

-

Non prevista

00113068

UNI EN 13215:2017 (EN 13215:2016)

Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

-

Non prevista

00113071

UNI EN 16147:2017

Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units

-

Non prevista

00113073

UNI EN 12102-1:2018 (EN 12102-1:2017)

Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers

-

Non prevista

00113078

UNI EN 14825:2016

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

-

Non prevista

00113077

UNI EN 14511-1:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions

-

Non prevista

00113074

UNI EN 14511-4:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements

-

Non prevista

00113075

UNI EN 14511-2:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions

-

Non prevista

00113076

UNI EN 14511-3:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods

-

Non prevista

00113C05

EN 1397:2015/AC:2016 (EC 1-2016 UNI EN 1397:2

Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance

-

Non prevista

00113081

UNI EN 14825:2019 (EN 14825:2018)

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

-

Non prevista

00113C06

EN 16147:2017/AC:2017

Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units

-

Non prevista

00113094

EN 16147:2017/FprA1

Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units

-

Non prevista

00113039

EN 16147:2011

Heat pumps with electrically driven compressors - Testing and requirements for marking for domestic hot water units

This European Standard specifies methods for testing and reporting of the rating and it specifies requirements for marking of air/water, brine/water, water/water and direct exchange/water heat pumps with electrically driven compressors connected to or including a domestic hot water storage tank. When these units are used for space heating, then EN 14511-1 to EN 14511-4 applies. This European Standard comprises only factory-made units which can be ducted on the airside. This European Standard comprises only the testing procedure for the domestic hot water production of the heat pump system. Note: Testing procedures for simultaneous operation for domestic hot water production and space heating are not treated in this standard. Simultaneous means, that domestic hot water production and space heating generation occur at the same time and may interact. In the case of units consisting of several parts, the standard applies only to those designed and supplied as a complete package. This European Standard does not include any requirement about the quality of water.
French Title

Non prevista