User

Password

Recupero Password

CT 232 - Sistemi di compressione ed espansione

Coordinatore CT: N.D. - Project Leader: Merlini Mattia - Project Assistant: N.D. - Maggiori Informazioni

In questa sezione è riportata tutta la documentazione del Gruppo Consultivo o della Commissione Tecnica, suddivisa tra attività nazionale svolta direttamente e attività CEN e/o ISO svolta dalla CT in qualittà di Mirror Committee.

CEN/TC 232 - Compressors, vacuum pumps and their systems

Norme vigenti

Chiudi Tutti

Codice progetto

Codice Norma

Titolo

Sommario

Pubblicazione UNI

Espandi

00232006

EN 1012-1:2010

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

This standard is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise air, nitrogen or inert gased. This standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation and maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.

Sì 25/11/2010

Esegui il login per scaricare i documenti

Espandi

00232007

EN ISO 2151:2008

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

This International Standard specifies methods for the measurement, determination and declaration of the noise emission from portable and stationary compressors and vacuum pumps. It prescribes the mounting, loading and working conditions under wich measurements are to be made.

Esegui il login per scaricare i documenti

Espandi

00232011

EN 1012-2:1996+A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal.

Espandi

00232013

EN 1012-3:2013 (UNI EN 1012-3:2014)

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

This part of EN 1012 is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).

Sì 30/01/2014

Esegui il login per scaricare i documenti

Espandi

00232014

UNI EN ISO 11011:2015

Compressed air - Energy efficiency - Assessment (ISO 11011:2013)

-

Sì 28/05/2015

Esegui il login per scaricare i documenti



Norme ritirate

Codice progetto

Codice Norma

Titolo

Sommario

Pubblicazione UNI

00232003

EN ISO 2151:2004

Acoustics - Noise test code for compressors and vacuum pumps Engineering method (grade 2) (ISO 2151:2004)

This noise test code specifies methods for measurement, determination and declaration of the noise emission from compressors and vacuum pumps: a) measurement of the sound pressure level at the indicated position of the operator; b) derivation of the noise emission expressed as the sound power level of the machine under specified load conditions. This noise test code applies to stationary and portable compressors as specified in EN 1012-1, "Compressors - Safety" and vacuum pumps as specified in EN 1012-2 "Vacuum Pumps - Safety".

Non prevista

00232002

EN 1012-2:1996

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPa (750 mbar) absolute, (i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

Non prevista

00232001

EN 1012-1:1996

Compressors and vacuum pumps - Safety requirements - Part 1: Compressors

This standard is applicable to all types of compressors. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal. Compressors intended for use in special applications shall also comply with any specific standards relating to those applications. This standard specifies safety requirements for all compressors and additional requirements for the following specific types: Compressors for various types of gases - oil-lubricated air compressors - oil-flooded air compressors - oil-free air compressors - compressors for handling hazardous gases (gas compressors) - compressors for handling oxygen - compressors for handling acetylene Compressors for extreme temperature and pressures - high pressure compressors, over 40 bar - compressors for low inlet temperatures, below 0 øC. Other types of compressors - large compressors (over 1000 kW, input power) - portable and skid mounted air compressors - compressors exposed for potentially explosive atmospheres Exceptions The following compressors are excluded from the scope of this standard: - compressors having a shaft input power of less than 0,5 kW - compressors for gases other than acetylene, having a maximum allowable working pressure of less than 0,5 bar - refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378.

Non prevista

Esegui il login per scaricare i documenti

00232C01

EN ISO 2151:2004/AC:2006

Acoustics - Noise test code for compressors and vacuum pumps Engineering method (grade 2) (ISO 2151:2004)

This noise test code specifies methods for measurement, determination and declaration of the noise emission from compressors and vacuum pumps: a) measurement of the sound pressure level at the indicated position of the operator; b) derivation of the noise emission expressed as the sound power level of the machine under specified load conditions. This noise test code applies to stationary and portable compressors as specified in EN 1012-1, "Compressors - Safety" and vacuum pumps as specified in EN 1012-2 "Vacuum Pumps - Safety".

Non prevista





Via Scarlatti 29, 20124 Milano
Tel. +39 02 266.265.1
Fax +39 02 266.265.50
P.IVA 11494010157

Social CTI

Seguici!

Twitter LinkedIn

Disclaimer - Privacy