Path: Home » Attività Normativa » CT56/GL01 - Interfaccia nazionale ISO/TC 197 - Commissione UNI-CEI "Idrogeno" » ISO/TC 197 » Norme Pubblicate

CT56/GL01 - Interfaccia nazionale ISO/TC 197 - Commissione UNI-CEI "Idrogeno"

Coordinatore CT: N.D. - Project Leader: Merlini Mattia - Project Assistant: N.D. -

In questa sezione è riportata tutta la documentazione del Gruppo Consultivo o della Commissione Tecnica, suddivisa tra attività nazionale svolta direttamente e attività CEN e/o ISO svolta dalla CT in qualittà di Mirror Committee.

ISO/TC 197 - Hydrogen technologies

Norme vigenti

Codice progetto	Codice Norma	Titolo	Sommario	Pubblicazione UNI
ISO 15594	ISO 15594:2004	Airport hydrogen fuelling facility operations	This Publicly Available Specification specifies the fuelling procedures, hydrogen boil-off management procedures, storage requirements of hydrogen, and characteristics of the ground support equipment required to operate an airport hydrogen fuelling facility.	Non prevista
ISO 26142	ISO 26142:2010	Hydrogen detection apparatus - Stationary applications	This international standard defines the performance requirements and test methods of stationary hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations.	Non prevista
ISO 22734-2	ISO 22734-2:2011	Hydrogen generators using water electrolysis process - Part 2: Residential applications	ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.	Non prevista
ISO 22734-1	ISO 22734-1:2008	Hydrogen generators using water electrolysis process - Part 1: Industrial and commercial applications	ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.	Non prevista
ISO 16110-2	ISO 16110-2:2010	Hydrogen generators using fuel processing technologies � Part 2: Test methods for performance	This International Standard provides test procedures for determining the performance of packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m3/h (n) at 0 °C and 101,325 kPa, herein referred as hyd rogen generators, that convert a fuel to a hydrogen rich stream of composition and conditions suitable for the type of device or process using the hydrogen.	Non prevista
ISO 16110-1	ISO 16110-1:2007	Hydrogen generators using fuel processing technologies - Part 1: Safety	This international standard applies to packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m3/hr at 20 °C and 101,325 kPa, herein referred as hydrogen generators, that convert an input fuel to a hydrogen rich stream of composition and conditions suitable for the type of device using the hydrogen.	Non prevista
ISO 13985	ISO 13985:2006	Liquid hydrogen - Land vehicle fuel tanks	This International Standard specifies the requirements for refillable tanks for liquid hydrogen used as a fuel in land vehicles as well as the testing methods required to ensure that a reasonable level of protection from loss of life and property resulting from fire and explosion is provided. This International Standard is applicable to fuel tanks permanently attached to land vehicles.	Non prevista
ISO 13984	ISO 13984:1999	Liquid hydrogen - Land vehicle fuelling system interface	-	Non prevista
ISO/TR 15916	ISO/TR 15916:2004	Basic considerations for the safety of hydrogen systems	This Technical Report provides guidelines for the use of hydrogen in its gaseous and liquefied forms. It identifies the basic safety concerns and risks and describes the properties of hydrogen that are relevant to safety. Detailed safety requirements associated with specific hydrogen applications are treated in separate ISO standards.	Sì
ISO 15869	ISO/TS 15869:2009	Gaseous hydrogen and hydrogen blends - Land vehicle fuel tanks	ISO 15869:2009 specifies the requirements for lightweight refillable fuel tanks intended for the on-board storage of high-pressure compressed gaseous hydrogen or hydrogen blends on land vehicles.	Non prevista
ISO 20100	ISO/TS 20100:2008	Gaseous hydrogen - Fuelling stations	ISO/TS 20100:2008 specifies the characteristics of outdoor public and non-public fuelling stations that dispense gaseous hydrogen used as fuel onboard land vehicles of all types. Residential and home applications to fuel land vehicles are not covered.	Non prevista
ISO TR 15916	ISO/TR 15916:2015	Basic considerations for the safety of hydrogen systems	-	Non prevista
ISO19880-3	ISO 19880-3:2018	Gaseous hydrogen - Fuelling stations - Part 3: Valves	-	Non prevista
ISO 19880-5:2019	ISO 19880-5:2019	Gaseous hydrogen � Fuelling stations � Part 5: Dispenser hoses and hose assemblies	-	Non prevista
ISO 19881	ISO 19881:2018	Gaseous hydrogen - Land vehicle fuel containers	-	Non prevista
ISO 19882	ISO 19882:2018	Gaseous hydrogen - Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers	-	Non prevista
ISO/TS 19883	ISO/TS 19883:2017	Safety of pressure swing adsorption systems for hydrogen separation and purification	-	Non prevista
ISO 16111	ISO 16111:2018	Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride	-	Non prevista
ISO 17268:2020	ISO 17268:2020	Gaseous hydrogen land vehicle refuelling connection devices	-	Non prevista
ISO 14687:2019	ISO 14687:2019	Hydrogen fuel quality - Product specification	-	Non prevista

Codice progetto	Codice Norma	Titolo	Sommario	Pubblicazione UNI
ISO 19880-1:2020	ISO 19880-1:2020	Gaseous hydrogen � Fuelling stations � Part 1: General requirements	-	Non prevista
ISO 22734:2019	ISO 22734:2019	Hydrogen generators using water electrolysis � Industrial, commercial, and residential applications	-	Non prevista
ISO 19880-8:2019/Am	ISO 19880-8:2019/Amd 1:2021	Gaseous hydrogen � Fuelling stations � Part 8: Fuel quality control � Amendment 1: Alignment with Grade D of ISO 14687	-	Non prevista

Norme ritirate

Codice progetto	Codice Norma	Titolo	Sommario	Pubblicazione UNI
ISO 14687-1	ISO 14687-1:1999	Hydrogen fuel - Product specification - Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles	--	Non prevista
ISO 17268	ISO 17268:2006	Compressed hydrogen surface vehicle refuelling connection devices	ISO 17268:2006 applies to design, safety and operation verification of Compressed Hydrogen Surface Vehicle (CHSV) refuelling connection devices hereinafter referred to as nozzle and receptacle. ISO 17268:2006 applies to nozzles and receptacles which (1) prevent hydrogen fuelled vehicles from being refuelled by dispenser stations with working pressures higher than the vehicle; (2) allow hydrogen vehicles to be refuelled by dispenser stations with working pressures equal to or lower than the vehicle fuel system working pressure; (3) prevent hydrogen fuelled vehicles from being refuelled by other compressed gases dispensing stations; and (4) prevent other gaseous fuelled vehicles from being refuelled by hydrogen dispensing stations.	Non prevista
ISO 16111	ISO/TS 16111:2006	Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride	The scope of this standard shall apply to transportable gas storage devices, valves and pressure reliefdevices, intended for use with a metal hydride, gaseous hydrogen storage system. This standard shall apply to refillable devices only.	Non prevista
ISO 14687-2	ISO 14687-2:2008	Hydrogen fuel � Product Specification � Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles	This Technical Specification specifies the quality characteristics of hydrogen fuel in order to assure uniformity of the hydrogen product as dispensed for utilization in PEM fuel cell road vehicle systems.	Non prevista
ISO 14687	ISO 14687-1:1999/Cor 1:2001	Hydrogen fuel - Product specification	Scope	Non prevista
ISO 16111	ISO 16111:2008	Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride	This International Standard defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems.	Non prevista
ISO 17268	ISO 17268:2012	Gaseous hydrogen land vehicle refuelling connection devices	ISO 17268:2006 applies to design, safety and operation verification of Compressed Hydrogen Surface Vehicle (CHSV) refuelling connection devices hereinafter referred to as nozzle and receptacle. SO 17268:2006 applies to design, safety and operation verification of Compressed Hydrogen Surface Vehicle (CHSV) refuelling connection devices hereinafter referred to as nozzle and receptacle. ISO 17268:2006 applies to nozzles and receptacles which (1) prevent hydrogen fuelled vehicles from being refuelled by dispenser stations with working pressures higher than the vehicle; (2) allow hydrogen vehicles to be refuelled by dispenser stations with working pressures equal to or lower than the vehicle fuel system working pressure; (3) prevent hydrogen fuelled vehicles from being refuelled by other compressed gases dispensing stations; and (4) prevent other gaseous fuelled vehicles from being refuelled by hydrogen dispensing stations.	Non prevista
ISO 14687	ISO 14687-1:1999/Cor 2:2008	Hydrogen fuel � Product specification, technical corrigendum 2	"ISO 14687-1: Hydrogen fuel - Product Specification - Part 1: All applications except proton exchange membrane (PEM) fuel cell applications for road vehicles"	Non prevista
ISO 14687-2	ISO 14687-2:2012	Hydrogen fuel - Product specification - Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles	-	Non prevista
ISO 14687-3	ISO 14687-3:2014	Hydrogen fuel - Product specification - Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances	-	Non prevista
ISO/TS 19880-1	ISO/TS 19880-1:2016	Gaseous hydrogen - Fueling stations - Part 1: General requirements	-	Non prevista
ISO 19880-8:2019	ISO 19880-8:2019	Gaseous hydrogen � Fuelling stations � Part 8: Fuel quality control	-	Non prevista
ISO 19880-8:2019/AWI	ISO 19880-8:2019/AWI Amd 1	Gaseous hydrogen � Fuelling stations � Part 8: Fuel quality control � Amendment 1	-	Non prevista

CT56/GL01 - Interfaccia nazionale ISO/TC 197 - Commissione UNI-CEI "Idrogeno"

Coordinatore CT: N.D. - Project Leader: Merlini Mattia - Project Assistant: N.D. -

ISO/TC 197 - Hydrogen technologies

Norme vigenti

Norme ritirate

Latest News

In Rilievo

Social CTI

Scegli i cookie a cui vuoi acconsentire
	Cookie tecnici: questi cookie sono necessari per il corretto funzionamento del sito cti2000.it
	Cookie analitici: tracciano in maniera anonima alcune informazioni sulla provenienza del visitatore e la frequenza di visite