CT 257 - Stufe, caminetti e barbecue ad aria e acqua (con o senza caldaia incorporata)

00295008

EN 13240:2001/A2:2004

Roomheaters fired by solid fuel - Requirements and test methods

This Standard is applicable to non-mechanically fired appliances whose primary function is to provide heat into the space in which they are installed and which are listed under categories 1a and 2a of table 1 of prEN 13240. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn naturally occurring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products which are in the form of an identifiable consistent product or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to appliances having fan assisted combustion air.

Sì

00295002

EN 13240:2001

Roomheaters fired by solid fuel - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential roomheaters fired by solid fuel. This Standard is applicable to non-mechanically fired appliances which are listed under categories 1a and 2a of Table 1. These appliances provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to appliances with fan assisted combustion air.

Sì

00295004

EN 12809:2001

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel. This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW. This standard is also not applicable to the design and construction of automatic stoking devices.

Sì

00295006

EN 12809:2001/A1:2004

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

The standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn naturally occurring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products which are in the form of an identifiable consistent product or be multi-fuel in accordance with the appliance manufacturer's instructions.

Sì

00295001

EN 12815:2001

Residential cookers fired by solid fuel - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods and test fuels for type testing residential cooking appliances fired by solid fuel. This Standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to hopper fed or mechanically fired appliances or those appliances having fan assisted combustion air.

Sì

00295009

EN 13229:2001/A1:2003

Inset appliances including open fires fired by solid fuels - Requirements and test methods

The amendment to be drafted to cover Kachelofen and Putzofen appliances.

Sì

00295003

EN 13229:2001

Inset appliances including open fires fired by solid fuels - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods for type testing, residential open fires and inset appliances fired by solid fuel. This standard is applicable to hand fired appliances which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of Table 1. The surround of the appliances is integrated with the building with the exception of free-standing appliances and inset appliances which are installed into a fireplace recess or enclosure. This standard is not applicable to appliances with fan assisted combustion air. These appliances provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. They may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. Open fireplace components such as a bottomgrate with associated firefront which the manufacturer supplies for installation into an existing heat resistant, insulated firebox are not covered by this standard.

Sì

00295013

EN 14785:2006

Residential space-heating appliances fired by wood pellets - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emissions), instructions and marking together with associated test methods and test fuels for type-testing residential space heaters fired by pellets, and mechanically fed up to 50 kW nominal heat output.

Sì

00295014

EN 15250:2007

Slow heat release appliances fired by solid fuel - Requirements and test methods

This European Standard covers multi firing sauna stoves in which the stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads. This European Standard covers multi firing sauna stoves in which the stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads. This European Standard is not applicable to mechanically fed appliances, appliances having fan assisted combustion air or appliances with boiler. fuels for type testing residential slow heat release appliances fired by solid fuel. This standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a period of time after the fire has gone out. These appliances provide heat into the space where they are installed.These slow heat release appliances may be supplied either as assembled appliance or as pre-fabricated sections designed to be built on site in accordance with the manufacturer’s specified construction design. One off installations are not included.
This European Standard covers multi firing sauna stoves in which the stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads. This European Standard is not applicable to mechanically fed appliances, appliances having fan assisted combustion air or appliances with boiler. fuels for type testing residential slow heat release appliances fired by solid fuel. This standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a period of time after the fire has gone out. These appliances provide heat into the space where they are installed.These slow heat release appliances may be supplied either as assembled appliance or as pre-fabricated sections designed to be built on site in accordance with the manufacturer’s specified construction design. One off installations are not included.

Sì

00295007

EN 13229:2001/A2:2004

Inset appliances including open fires fired by solid fuels - Requirements and test methods

This amendment covers definitions, requirements and test methods for mechanically fed inset appliances including open fires.

Sì

00295C08

EN 12809:2001/AC:2006

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel. This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW. This standard is also not applicable to the design and construction of automatic stoking devices.

Sì

00295C14

EN 12809:2001/A1:2004/AC:2007

Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel. This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions. This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW. This standard is also not applicable to the design and construction of automatic stoking devices.

Sì

00295C15

EN 13229:2001/A2:2004/AC:2007

Inset appliances including open fires fired by solid fuels - Requirements and test methods

Text is not available

Sì

00295C09

EN 13240:2001/AC:2006

Roomheaters fired by solid fuel - Requirements and test methods

Text is not available

Sì

00295C13

EN 13240:2001/A2:2004/AC:2007

Roomheaters fired by solid fuel - Requirements and test methods

Text is not available

Sì

00295C16

EN 12815:2001/A1:2004/AC:2007

Residential cookers fired by solid fuel - Requirements and test methods

Text is not available.

Sì

00295C07

EN 12815:2001/AC:2006

Residential cookers fired by solid fuel - Requirements and test methods

Text is not available

Sì

00295005

12815:2001/A1:2004

Residential cookers fired by solid fuel - Requirements and test methods

This Standard is applicable to hand fired appliances whose primary function is to cook and whose secondary function is to provide heat into the space in which they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn naturally occuring or manufactured solid mineral fuels, peat briquettes, natural or manufactured wood logs and biomass based products which are in the form of an identifiable consistent products or be multi-fuel in accordance with the appliance maufacturer's instructions. This standard is not applicable to hopper fed or mechanically fired appliances or those appliances having fan assisted combustion air.

Sì

00295016

EN 15821:2010

Multi firing Sauna stoves fired by solid fuel - Requirements and test methods

Text is not available

Sì 25/11/2010

00295017

CEN/TS 15883:2009

Residential Solid Fuel Burning Appliances - Emission test methods

This European Technical Specification is applicable to residential heating and cooking appliances burning solid fuels and details methods for the measurements of NOx, and OGC/total hydrocarbons emissions and particulate and dust produced by these appliances and is to be used in conjunction with the test methods given in the European Standards covering these appliances. This European Technical Specification covers the NOx, and OGC/total hydrocarbons emission test methods, however it does not cover input data and detailed calculation procedures. For the particulate and dust emissions test methods, the national documents of those countries that have a test method are reference methods which are summarised in Informative Annex A, whilst those countries that do not have a specific test method, could choose one of these methods listed in the annex.

Sì

00295C06

EN 13229:2001/AC:2006

Inset appliances including open fires fired by solid fuels - Requirements and test methods

Text is not available

Sì

00295040

UNI EN 16510-2-6:2023

Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers

-

Sì 19/05/2023

00295048

UNI EN 16510-1:2023

Residential solid fuel burning appliances - Part 1: General requirements and test methods

-

Sì 19/05/2023

00295043

UNI EN 16510-2-2:2023

"Residential solid fuel burning appliances - Part 2-2: Inset appliances including open fires"

-

Sì 19/05/2023

00295045

UNI EN 16510-2-3:2023

"Residential solid fuel burning appliances - Part 2-3: Cookers"

-

Sì 19/05/2023

00295042

UNI EN 16510-2-1:2023

"Residential solid fuel burning appliances - Part 2-1: Roomheaters"

-

Sì 19/05/2023

00295041

UNI EN 16510-2-4:2023

"Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW"

-

Prossima

00295049

UNI EN 15544:2023

One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning

-

Sì 19/05/2023